Basket

Your basket is empty..

Injector Dynamics Injectors - 725cc - Nissan R35 GTR Set of 6 with "plug and play" adaptors - DISCONTINUED PRODUCT SEE INJECTOR DYNAMICS 1050CC INJECTORS

Injector Dynamics Injectors - 725cc - Nissan R35 GTR Set of 6 with "plug and play" adaptors - DISCONTINUED PRODUCT SEE INJECTOR DYNAMICS 1050CC INJECTORS

Out of stock

Product Information

Injector Dynamics fuel injectors are the result of batch testing large quantities of specially modified fuel injectors, and then carefully matching them into sets based on their dynamic flow across the pulsewidth range. The result is vastly superior cylinder to cylinder consistency, even at very low pulsewidths.

In addition to receiving tightly matched injectors, you will be provided with dead time compensation values across the entire pressure and voltage range of the injector. This data will insure that the compensations in your ECU work properly, and your air fuel ratios will remain consistent as atmospheric or voltage conditions change.

Item Features:

- No additional parts required for installation.
- Each injector verified to flow 1000cc/min at 43.5psi.
- Superior atomization and narrow spray pattern for more power, near factory idle, and excellent fuel efficiency.
- High Impedance; no need for injector drivers or injector resistors.
- High pressure capability up to 100psi fuel pressure. (Flows 1525cc/min @ 100psi; Requires atleast 10V)
- High duty cycle, with a recovery time of only 1ms: Capable of 92.5% duty cycle at 9k rpm and 95% duty cycle at 6k rpm while maintaining linearity within 1%
- Excellent low pulsewidth response: Injectors perform with linearity within 2% to 2ms; predictable response at 1.5ms.
- Superior atomization: Droplet size of the 1000cc injector is comparable to Siemens Mototron 60lb injector and is better than Multec (Delphi/Precision/MSD) 95lb, Standard Motor Products (RC) 1000cc and Siemens 72 and 83lb injectors.
- Repeatable consistency: No two sets will require more than a 1% trim Ruler flat response, unmatched linearity means easy tuning and accurate compensations.
- Set includes (6) 1000cc injectors and (6) PNP Harness Adaptors.

Category: Fuelling

Vehicle Fitment Information


All fitment information is only a guide, exact fitment may differ. If in doubt please email us.

Why shop with us?

Value For Money

Worldwide Delivery

Secure On-Line Payments


Hondata
  • Longest serving official Hondata dealer in Europe
  • On site dedicated electronics engineer
  • Quickest turnaround times
  • Technical support
  • All Hondata products stocked
  • Full on-site dyno tuning service
  • ECU testing

Browse our expanding range of premium quality CPL Racing products